I thought it might be due to a RAM issue, but since it works on the old one I'm really doubting that. I then tried to update the BIOS through USB BIOS flashback and it still did not work with the new one (it worked with the old one).Īt this moment I am really not sure what to do. Tried updating the BIOS to the newer version through EZ Flash 2, and did not work with the new CPU, though it worked with the old one. I tried swapping back to my old CPU and all was running smoothly again. Today I tried swapping my CPU for an i7 4790, which I had in another PC, but, when I tried booting it up, it turned on the CPU led (with Q-Code 00) and the fans, but did not give any other response (the monitor had no signal). I had my PC set with the specs I just specified and all was running smoothly. RAM - 2 kits of G.SKILL Ripjaws DDR3 1600 CL9 2x8GB (32GB in total).By electrical convention, red is positive, black is negative. CPU - i5 4440 (with Cooler Master Hyper 212 Evo V2) This includes connecting the power switch, reset switch, hard drive LED light, power LED.It could be the perfect time for you to go shopping for new replacement parts. I'll try to answer any questions any of you might have and the full parts list is in the youtube video as well. A red LED on the motherboard could indicate that the component has already run the course of its lifetime. Please note that this is unique to my system and the mileage might vary depending on the CPU & RAM used. it took me 2 days of adjusting and restarting ( restarted system at least 50 times over a 2 day period to test stability.) before finding voltages and timings that worked. The RAM timings could play a part as well as i did ease up the timings just a bit and haven't reduced them in fear of instability again. I researched issue and narrowed it down to the DRAM, VCCIO and system agent voltages. This happened like three or four times, then it just gave me the red CPU light without turning on (fans, leds, liquid cooling were on). This is after living with the issue for around a month and then switching to standard settings ( no over clock and ram at 2400-I think, LOL ) for around 3 weeks and system was very stable. But after a few minutes, the system shut downeven though everything was powered up (fans, liquid cooling, motherboards led) and the CPU red light on the debug leds was on. To get the system to boot I would have to press the reset button and then after around 10 seconds, the system would reboot and I assume skip either the CPU or RAM speed POST tests and then boot without fail.Īfter initially building the frame and cutting the first set of side panels I decided to spend some time working on the stability issues. My exact issue was that after enabling XMP or using the Asus auto overclocking utility, once every 4 to 10 boots system would sit with the red CPU LED lit and no additional activity. Like almost everyone else here with the strix z270i Gaming I was having issues with a consistent stable boot with XMP enabled. very unhappyĪbove is my build I've been working on. Whats going on ASUS? I was hoping a BIOS update would fix it, but I'm on the latest there is and no change. System is 100% solid, I've been stress testing the hell out of this thing and it doesn't skip a beat. I do that, go into bios and immediately exit without changing a damn thing and waddaya know. Then I just turn it back on, it'll complain about it not posting and force me into the BIOS with F1. now what I have to do to get back into Windows after getting the red LED is to simply hold the power button for 5-10 secs to force the system off. Corsair AF Series AF120 LED (2018) CO-9050083-WW 120 mm Red LED Case Fan, 3-Pack. I repeated this same process, but applying all the settings I want in the BIOS, including a mild 4.5ghz o/c and it did the exact same thing. * Flicked power switch on PSU (same as pulling the plug) To prove to myself it isn't a setting in the BIOS here is what I did. RED LED on the board! If I don't remove power from the system completely, I can shut it down and start it up again no problem. As soon as power is removed from my system. I've discovered that it doesn't make a damn bit of difference what my settings are, using XMP or not. There is obviously an issue with these boards if so many people are having the same/similar enough issues. I just down/side-graded to this board from a Maximus VIII Gene where I was running my i7 6700K and GSkill 2800mhz DDR4 and GTX1080Ti with absolutely no issue.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |